had a/c compressor and fan clutch changed. fan clutch stayed on , robbed my power, belt squeals when i step on the gas too hard. had guy replace it and it still stays on all the time. he says it is fine and that the belt squealing has nothing to do with what he did, even though it never squealed before. never had heating problems even when the fan clutch didn't work. should i try another clutch manufacturer, an electric one, a flex fan?
96 ford fan clutch always on?
Sounds like the clutch is not working. To check it, use a timing light and shine it at the fan blades. When you rev it up you will see the fan spin faster and then level off. Then release the throttle and let it slow down. You will be able to see with the timing light. If the belt squeals, its probably loose, and if thats slipping your clutch will not work properly because it is being jerked around. Check belt tension, when the cars is off there should be a SLIGHT drag when you spin the fan. Make sure your water pump is not seizing up because of maybe too much belt tension. The squeal should not be ignored, its burning rubber on your pulleys.
96 ford fan clutch always on?
A simple solution so you can sleep soundly tonight: Go to your Ford dealer and simply ask if there's a problem or not. They won't hurt you, don't worry.
Try another one made by a high quality manufacturer, do not use a flex fan because you will fry the a/c system and don't rely on an electric fan because you will always be looking at the temp guage.
i doubt the fan/clutch is the problem... maybe the tensioner or the replacement compressor
If it's the A/C clutch and you've replaced it twice, check for a sticking thermostat keeping the clutch engaged.
Subscribe to:
Post Comments
(Atom)
No comments:
Post a Comment