How difficult is a Clutch change in a Toyota Pickup?

1994 22re base 5-speed. 192000 will need a clutch soon im sure. It slips hard when accelerating onto the highway....|||its a hard job unless you have a good transmission jack to use on it,or a lift to put it up on,and either way its still a lot of work on it,its not an impossible job ,but if you have never done it before you,ll be better off letting someone else do it for you,there%26#039;s a lot of things that can go wrong with doing this job,you also have to have the flywheel re-surfaced to make the job work right,good luck with it.|||your welcome.

Report Abuse

|||Much easier than in a FWD vehicle. Plus you have some space, since it is a truck. Go pick up a manual (haynes or chiltons) for your truck, and read over it. Simple overview is unbolting the driveshaft, draining the tranny fluid, removing the shifter, removing the driveshaft, unbolting the tranny, unbolting the bell housing (if you detached it from the tranny) removing pressure plate, clutch disc will fall off, removing flywheel and getting resurfaced or new, replacing pilot bushing and throwout bearing, then reverse of removal, with adding fluid as an extra step. It is slightly more complecated, but not much.