What are the details of changing the complete clutch on a 92 GMC Sonoma?

The engine is a 2.8 Liter V6 with a 5 speed stick shift on the floor.|||its actually not a hard vehicle to do. but the flywheel needs to be surfaced, you need to replace, the pressure plate,throw out bearing and the pilot bushing. also would be a good time to change the trans fluid as well as check the u joints and any seals replaced. also you would want to check the rear main seal on the engine and remember to torque the flywheeel correctly as you could damage the crankshaft flange and then the rear main would be leaking. you have to be able to get the vehicle high enough to work underneath it. if you dont have the proper tools i wouldnt suggest it|||you need a screwdriver|||take old clutch out and stick in new cluch... if you can%26#039;t do that then don%26#039;t **** with it!!!|||just like do it to a 350 v8|||Buy a repair manual for your vehicle. Much easier than explaining it step by step...whew. Good luck.