How do i change a 92 jeep wrangler hydraulic clutch slave and master?
You will need a Haynes Manual. It will walk you through the procedure and has pictures %26amp; drawings. Wrangler YJs from '87 - '93 have an internal slave cylinder that is located inside the clutch housing. You will have to remove the transmission to replace it.
Happy Trails!
How do i change a 92 jeep wrangler hydraulic clutch slave and master?
With tools.
You will need a socket set with long extensions.
Pull the drive shafts
pull the x-member
pull the transmission and transfer case
the slave is inside the bell housing. It unbolts and has a hydraulic line. Unhook the line too.
Replace with new
re-install in reverse order.
Put fluid in reservoir
Have a buddy pump up the clutch and bleed it out like you would brakes
No comments:
Post a Comment